loading

Techemer -  Water-Lubricated Bearings & Shaft Seals Manufacturer Since 2008 — ISO-Certified | Fully Patented

INDRON®UNIV – A high-strength multipurpose elastoplastic alloy

A high-strength multipurpose elastoplastic alloy with excellent mechanical and wear resistance performance, suitable for complex working conditions and high-load environments. 

Key Advantages :
approximately 1.25 g/cm³
53 MPa, outstanding mechanical strength
35%, high strength with relatively low elasticity
75~83°, high hardness for stronger wear resistance
50.6 MPa, suitable for high-load conditions
55 MPa under low-speed oscillation, 30 MPa under continuous operation
70℃ in water, 110℃ in dry state
relative volumetric wear 215 mm³, good wear resistance
1% by weight, 0.9% by volume
no data

Material Grade

Material UNIV
Properties Unit Test Method Typical Value
Physical Property
Density g/cm³ GB/T 1033.1 /ISO 1183.1 1.25
Mechanical Properties
Tensile Strength MPa GB/T 1040.2 /ISO 527.2 53
Elongation at Break % GB/T 1040.2/ISO 527.2 35
Shore Type D Hardness ° GB/T 2411/ISO 868 75~83
Water Absorption Mass (Saturated) % GB/T 1690/ISO 1817 1
Water Absorption Volume (1080h) % GB/ T1690/ISO 1817 0.9
Charpy Impact Strength (Notched) kJ/㎡ GB/T 1043.1/ISO 179.1 70
Compressive Strength MPa GB/T 1041/ISO 604 50.6
Modulus of Compression MPa GB/T 1041/ISO 604 1000
Maximum Load Capacity (Low-speed oscilating at 25% strain ) MPa   55
Maximum Load Capacity (continuous operation at 25% strain ) MPa   30
Maximum Operation Temperature (in water) °C   70
Maximum Operation Temperature (Dry) °C   110
Friction Properties
Relative Volume Wear (by Rotating Cylinder Drum) mm³ GB/T 25262/ISO 23794 215

Recommended Applications

High-load bearings and mechanical components

Industrial equipment requiring extremely high strength and hardness

Multipurpose bearings and seals in complex environments

LEAVE A MESSAGE

Please feel free to contact us at any time

Take a look around our website. If you have a query or you need advice, We'll take time to help you. If you have any questions about your order, please feel free to contact us.
Ms. Jenny Li
+14163889018
jennyli@techemer.com.cn
no data
Customer service
detect